中文字幕亚州一区二区v,中文无码字幕一区到五区免费,亚洲国产阿v在钱2017,又污又黄无遮掩的网站

PRODUCTS

Service Tel:

+86-574-8702 9709

Products
Position:Home > Products
Water-based gloss oil

Water-based gloss oil (gloss coating for paper) 

This product is a post-finishing agent for high-end printed matter. It gives the printed matter a good Appearance, and plays a decorative and protective role such as aesthetics, anti-fouling and moisture-proof. It is a finishing agent widely used in the printing industry at present.

As we all know, traditional gloss oil contains a large amount of volatile organic compounds (VOC), which not only pollutes the atmosphere, but also seriously affects the health of operators, and cannot be used for glazing of food packaging. In the modern age with increasing awareness of environmental protection, water-based gloss oil with water as the medium has gradually highlighted its importance. It is the trend of the modern world to replace "oily" with "water-based".

Compared with oily gloss oil, this product has the characteristics of environmental friendliness, is safer for operators, has no concerns about inflammability and explosion, and is suitable for glazing of food packaging products. And like oily gloss oil with good gloss and quick drying characteristics.
 

Product Image:

 

Product Quality Index

Item

Index

Appearance

Milky white viscous liquid

Solid content, %

38-39

Viscosity mPa s

200±50

pH

7-9


Instructions

It can be directly brushed, scraped and sprayed on the surface of the paper, or it can be diluted with water to finish the surface of the paper.
 

Features

No VOC release, environmentally friendly;                 

Safe, no flammable, explosive worries;

High adhesion, high wear resistance, no cracking;             

Suitable for food packaging glazing, FDA approved;

High resistance to chemical solvents.

 

Precautions

Do not dilute with organic solvents such as alcohol. If you need to lower the viscosity, you can mix it with an appropriate amount of water.

After taking this product, the container and the tools that come into contact with this product should be washed with water immediately, so as to avoid adhesion and affect subsequent use.

If the viscosity of this product is found to be too low, it can be adjusted with a small amount of ammonia water.

After taking this product, the container should be closed to avoid deterioration due to exposure to air.

Hands, other parts of the body and clothing and other items should be washed immediately with water when they come into contact with the product.

 

Tel: 139 5781 7262 0574-8702 9707 137 7700 2416 159 5884 9949

Ningbo Huizhen New Material Co., Ltd.

Contact us
+86-574-8702 9709
13957817262 15958849949
Address
Office address: 2-9, No. 35, Baoqing Road, Jiangbei District, Ningbo City, Zhejiang Province, China
Production address: Building 6, Medical Equipment Intelligent Manufacturing Park, Ningbo South Binhai Development Zone, Liyang Town, Ninghai County, Ningbo City, Zhejiang Province, China
Copyright(C)2022, Ningbo Huizhen New Material Co.,Ltd. All Rights Reserved. Supported by  ChemNet ChinaChemNet Toocle
主站蜘蛛池模板: 通许县| 潞西市| 蕉岭县| 鸡泽县| 海淀区| 屯门区| 米易县| 叙永县| 临湘市| 柘城县| 商城县| 句容市| 措勤县| 嫩江县| 凤庆县| 广南县| 霍州市| 博客| 惠安县| 雷波县| 安吉县| 潜江市| 抚顺县| 玛沁县| 云安县| 龙游县| 安顺市| 合川市| 易门县| 个旧市| 洛浦县| 南木林县| 佛教| 三门峡市| 红桥区| 卓资县| 大新县| 浦江县| 邵东县| 平谷区| 城步|